Showing 28–36 of 92 results

Eyewash ABS Plastic Ball

Brand: HAWS

Model 7260B wall-mounted eyewash with waste tailpiece

Features a round 11″ green ABS plastic receptor, aluminum wall bracket, and twin Soft-Flo ABS plastic anti-surge eyewash heads.

Model 7260B is certified by CSA to meet the ANSI Z358.1

Eyewash ABS Plastic Ball 7260BT

Brand: HAWS

Model 7260BT wall-mounted eyewash

Round 11″ green ABS plastic receptor, aluminum wall bracket, and twin Soft-Flo ABS plastic anti-surge eyewash heads.

Model is supplied with a waste tailpiece and trap. Supply: 1/2″ IPS. Waste: 1- 1/2″ IPS.

It is certified by CSA to meet the ANSI Z358.1

ABS Plastic Bowl 8320-8325

Brand: HAWS

Model 8320-combination shower and eyewash

10-5/8″ ABS plastic showerhead and an ABS plastic eyewash receptor with twin Soft-Flo ABS plastic anti-surge eyewash heads.

A pull rod activates shower.

Push flag activates eyewash.

Pipe and fitting: 1-1/4″ Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4″ IPS.

It is certified by CSA to meet the ANSI Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Model 8325-combination shower and eye/face wash

10-5/8″ ABS plastic showerhead and an 11″ ABS plastic eye/face wash receptor with twin Feather-Flo ABS plastic eye/face wash heads.

A pull rod activates shower. Push flag activates eyewash. Pipe and fitting: 1-1/4″ Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4″ IPS.

It is certified by CSA to meet the ANSI Z358.1

Window Sprinkler

Minimum Operating Pressure: 7 psi (0.5 bar)

Rated to 175 psi (12 bar) water working pressure

Thread size: 1/2” (15 mm) for VK790-VK794, 3/4” (20 mm) NPT for VK795 and VK796

Spray Nozzle Material Standards:

Nozzle Body: Brass UNS-C36000

Available Finishes: Brass or Chrome

Water Motor Alarms

Shipping Weight: Model F-2: 11 lbs. (5.0 kg); ModelG-2: 13 lbs. (5.9 kg)

Water working pressure: Rated to 175 PSI (12 bar)

Viking E-coat Spec: SPF02 W01

OrderingInformation

Model F-2,Viking Part No. 07862

Model G-2,Viking Part No. 07868

Standard Response Upright and Conventional Sprinkler

Minimum Operating Pressure: 7 psi (0.5 bar)*

K Factor: 2.8, 4.2, 5.6 & 8.0

Maximum Working Pressure: from the minimum 7 psi (0.5 bar) up to 250 psi (17 bar) for high-pressure systems. Factory tested hydrostatically to 500 psi (34.5 bar)

Glass-bulb fluid temperature rated to -65 °F (-55 °C)

*cULus Listing, FM Approval, and NFPA 13 installs require a minimum of 7 psi (0.5 bar). The minimum operating pressure for LPCB and CE inimum operating pressure for LPCB and CE

Approvals ONLY is 5 psi (0.35 bar).

Standard Response Pendent Sprinklers

Minimum Operating Pressure: 7 psi (0.5 bar)

Maximum Working Pressure: from the minimum 7 psi (0.5bar) up to 250 psi (17 bar) for high-pressure systems.

Factory tested hydrostatically to 500 psi (34.5 bar)

Nominal K-Factor: 2.8, 4.2, 5.6, 8.0

Glass-bulb fluid temperature rated to -65 °F (-55°C)

Deluge Valve UL Listed FM Approved

Sizes 2-1/2″ thru 8″ (DN65 thru DN200)

AV-1 Alarm Valves may be installed vertically or horizontally

Groove x Groove, Flange x Flange, Flange x Groove Alarm Valves are divided seat ring, rubber-faced clapper, check type, water flow alarm valves

For use in wet pipe (automatic sprinkler) fire protection systems

Working water pressure range is 20 to 300 psi (1,4 to 20,7 bar)

Listings and Approvals: UL, C-UL, & FM

2 Way Non Controllable Pillar Hydrant

Inlet : 4” PN 16 ( Optional : 4” ANSI #150RF )
Outlet : 2 1/2“ LVT Thread
Design Pressure : 15.7 bar
Test Pressure : 24.5 bar
Body Material : Cast Iron
Flow Rate : 38 l/sec
Gross Weight : 42 kg